ER-Collet with seal for IC ER25 | 430EA | < 15µm | Ø 10Application: Collets sealed with seal for IC DIN 6499 B (ISO 15488 B) ER system Note: Only nominal size d can be clamped with sealing plug for internal cooling (applicable up to 21 bar) In order to achieve an optimum sealing the tool must be clamped on the complete length of the ground drill of the collet.

The collet clamping Ø range is always up to 0

In the tailstock of the lathe so that no friction between the workpiece and the tip occurs

- Scanning surface Ø24

- without serial number

Tensile strength in the core of min

Without wrench

DIN 1835 form A+B+E and DIN 6535 form HB+HE (larger than Ø 20 mm only with reduction sleeve)

- Wooden box

For mounting straight-shank tools acc

The chucking diameter is configured for a tool tolerance of h6

Wherever reduced interference contours are required

5 with h4-tolerance and Ø 6 – Ø 32 with h6-tolerance0